Our High E Facilitator (a.k.a. “donut” or poor man’s split-E) is an option that may help tame the high E on the flute. This note can be problematic, as it tends to respond stubbornly and sound stuffy and out of tune. Our easy-to-install, pre-made high E facilitators can be glued into the lower G tone hole with 5-minute epoxy. Available in white delrin.
How to Install a High E Facilitator:
Step 1: Measure the inner diameter of the lower G tone hole to select the correct size high E facilitator. The diameter of the facilitator should fit the hole securely as possible without being tight.
Step 2: Insert your flute body mandrel into the bore of the instrument. Please ensure that the mandrel is clean and polished, and wipe the bore first. We don’t want to create any scratches.
Step 3: Wearing your gloves, mix up some 5-minute epoxy and apply a small amount to the edge of the high E facilitator with a toothpick.
Step 4: Set the high E facilitator into the tone hole (make sure it’s the correct hole). Make sure that the saddle-shaped side is fitting down on the mandrel and that the facilitator as a whole sits below the edge of the tone hole. The mandrel serves as an alignment tool and as a stop when inserting the high E facilitator.
Step 5: Clean up any excess glue residue quickly before it sets. After a minute, pull the mandrel out. Let the glue set up for half an hour then reassemble the instrument. Remember to take the keys off the flute before shoving the high E facilitator in.
Jim Schmidt Delrin Bushing Upgrade Kit for Yamaha
Tenor Sax Key Height Gauge
JLS Flute Screwboard
Burnisher-Hammer Head
JLS Tuning Slide Expanding Ball Tool Medium 1/2"
No. 28 JLS Key Arm and Foot Pliers for Sax
Beeswax 2.5 oz Round Plug
Valve Stem Washer - 0.8mm Opti-Kork - 12.7mm OD x 5.6mm ID
Valve Stem Washer - 1.1mm Firm Black - 12.7mm OD x 5.6mm ID
Directors Oboe/Piccolo Pad Assortment
Top Cap Washer - 3.2mm Quiet Black - 17.5mm OD x 9.9mm ID
JLS Flute Leak Isolator
Fingerbutton Washer - 3.4mm Quiet Black - 17.5mm OD x 4.8mm ID
Threadlocker IC-LOC™ Blue
Pearl Powder 1/2 oz.
Burnisher - Straight


