Home / Tools / Saxophone

Showing all 15 results

Show sidebar

No. 29 JLS Spring Installing Parallel Pliers

The JLS parallel action Spring Installing Pliers ensure that the spring will be properly seated in the post with minimal effort.

The non-marring surfaces of the pliers facilitate a smooth, direct pressure on install while greatly reducing the chance of slipping.

$52.50 Add to cart

JLS Sax Neck Tenon and Receiver Plugs

Our JLS Sax Neck Tenon and Receiver Plugs are offered as a mandrel to fit in the neck tenon and receiver. They can be used to re-round and straighten the neck or receiver. Held in a vice, they can be used as a third hand to help manipulate a neck in order to straighten it. Inserted in the neck receiver the plugs can be used as device to help align a bent stack tube.

  • Stainless Steel
  • Can be held in vice or freehand
  • Re-round neck receiver
  • Re-round neck tenon
  • “Third hand” leverage for neck alignment when bent

Tenor Sax Key Height Gauge

Helps set a consistent key height between the pad and the tone hole on saxophones. One side is for a medium height setup, the other is for a open setup.  Four steps on either side are for palms, left hand, right hand, and Bell keys.

Click Here for Instructions

$33.50 Add to cart

Alto Sax Key Height Gauge

Helps set a consistent key height between the pad and the tone hole on saxophones. One side is for a medium height setup, the other is for a open setup.  Four steps on either side are for palms, left hand, right hand, and Bell keys.

Click Here for Instructions

$29.50 Add to cart

JLS Sax Key Adjusting Lever

233041 A versatile tool that will perform several functions necessary to properly set up a saxophone. Most likely, you are currently using methods and possibly other tools to achieve the same results that this tool will give. Most will find the tool is a ‘hand saver,’ and more exacting.

$24.25 Add to cart

JLS Neck Cork Template

The JLS Neck Cork Template is a simple but elegant device that acts as a template for cutting saxophone neck corks.

It’s designed to utilize as much area as possible out of our sheet cork, making up to 12 cork cutouts from a 4” x 12” sheet (103mm x 305mm).

For older saxophone necks (e.g. 1958 Mark VI) the length of the cork may need to be cut longer than the template in order to cover bare metal spots from previous lacquering.

Aprox. Dimensions: 1.64” x 2.35“ (41.65mm x 59.3mm)

$3.75 Add to cart

JLS Sax Neck Leak Isolators

As with any woodwind or brasswind, a leak at the top of the instrument affects everything below so the neck area warrants careful inspection every time and we’ve developed the JLSmith Sax Neck Leak Isolators specifically to make this a fast, easy operation.

JLS Saxophone Body Bar

Easily remove small to medium sized dents in the body tube of all saxophones. A fantastic way to remove localized dents in the saxophone body.

$75.50 Read more

JLS Saxophone Bow Bar

Our Saxophone Bow Bar is a fantastic way to remove dents from the bottom bow of all saxophones. The bar is bent to access the bow through the bell on one end and through the Eb hole on the other end.

$95.50 Read more

JLS Selmer Sax Brace Tool

The Selmer-style bell brace will compress when the bell is pushed in toward the body. To restore the look of the brace and return the bell to its correct position, we must restore the brace to “round.” After removing the keys as needed, insert the brace tool into the brace (small end first). Wedge the tool in place then tap on the brace with a rawhide mallet until restored. This brace works on the Balanced Action, Super Balanced Action, MK VI, and the MKVII models.

$47.50$53.50 Select options
$18.95$21.95 Select options

Rivet Peening Punch

This tool will peen the rivets mushroom style. This works best for rivets with thicker side walls. When the rivet is viewed from the side, this style has straight sides on the end where it is open.

$20.50 Add to cart

Rivet Splitting Punch

This tool will split the rivets banana style. This works best for rivets with relatively thin walls. When the rivet is viewed from the side, this style rivet looks to be rounded in on the hole end.

$47.15 Add to cart