Home / Tools / General Bench Tools

Showing 1–24 of 38 results

Show sidebar

JLS Bench Motor – Demo

Product is pre-owned and visual conditions very, each bench motor has been inspected for quality assurance.

  • Sherline DC motor
  • Adjustable speed
  • High torque at low rpm
  • Foot switch included
  • Keyless Albrecht chuck
$850.00 Add to cart

JLS Mouthpiece Puller

Our new JLS Mouthpiece Puller allows the user to remove stuck mouthpieces comfortably and easily without the awkward fumbling with the two-screw style or the jaws that flex and slip like other one screw models. It’s time to retire your older mouthpiece puller!

$133.50 Add to cart

JLS Small Chain Nose Pliers

These chain nose pliers are among 3 JLS small general use pliers that we offer.

  • Black rubber foam grips
  • Approximately 130mm (5″) long
  • Nose measure approximately 25mm (1″) long

Check out our JLS Small Flat Nose Pliers and JLS Small Round Nose Pliers as well.

$11.50 Add to cart

JLS Small Flat Nose Pliers

These flat nose pliers are among 3 JLS small general use pliers that we offer.

  • Black rubber foam grips
  • Approximately 130mm (5″) long
  • Tips measure approximately 25mm (1″) long

Check out our JLS Small Round Nose Pliers and JLS Small Chain Nose Pliers as well.

$11.50 Add to cart

JLS Small Round Nose Pliers

These round nose pliers are among 3 JLS small general use pliers that we offer.

  • Black rubber foam grips
  • Approximately 130mm (5″) long
  • Tips measure approximately 25mm (1″) long

Check out our JLS Small Flat Nose Pliers and JLS Small Chain Nose Pliers as well.

$11.50 Add to cart

JLS Q2 Felt Work Mat

Similar to the Q Felt Bench Pad that we used to make, our JLS Q2 Felt Work Mat is made of an incredibly soft, yet dense material.

This mat has laser-cut edges and a laser-engraved JLS logo.

Dimensions: 350mm x 600mm (13.8″ x 23.6″)

$42.50 Add to cart

JLS Bench Peg

This tool features the same dimensions as the 201006 JLS Bench Peg – Delrin version that we used to make, but is now made out of 3D printed materials which allow this product to be stronger as well as more durable and slip-resistant than the Delrin version.

The JLS Bench Peg can be used in a variety of ways

  • as a support for clarinets when sanding cork on a tenon
  • as an anchor for tarnish ragging cloth to polish keys
  • as a dead center on a lathe

To Mount: Drill a 3/8” hole into the face of your workbench.

$24.50 Add to cart

JLS Key Trapeze

Straightening hinge tubes can be an awkward process and a difficult one without proper support, so we’ve made the JLS Key Trapeze.

It’s the third hand support of hinge tube repair – designed to hold and help straighten flute, clarinet and saxophone hinge tubes.

The 3D printed arms slide along a stainless steel rod and can be taken off, then flipped around, so that the step of the arm is facing inwards or outwards.

$36.50 Add to cart

1/2″ Diam. Round Felt Bob

Great for finishing valve and casing ports.

$3.55 Add to cart

Alcohol Glass Lamp – 3 oz.

Flame can be adjusted by raising or lowering split sleeve. Measures 2.58″ (65.5mm) in diameter and holds 3 oz. of fuel.

$20.35 Add to cart

Alcohol Replacement Wicks

1/4″ Diameter

$1.45 Add to cart

Bench Block – Square

Bench blocks are used as anvils for spring peening and as a base for sax pad installing. Use as a standard for rod and cup straightening, etc.

$21.85$35.10 Select options

Bench Filing Block

Provides a 3/4″ (83mm) extension of the work bench. Consists of rubber block, iron frame, and chilled steel anvil. Used mainly for a softer surface when filing on a key, brace, or something else that needs support.

$26.00 Add to cart

Centering Point For Punch #245012

Replacement center for #245012 Centering Punch.

$5.10 Read more

Centering Punch

Non automatic. Must be tapped with riveting hammer (like our #230007 )

$3.95 Add to cart

Centering Punch – Automatic

Adjust for light or heavy strokes. Pushing down on the tool activates the striking mechanism.

 

$72.25 Add to cart

Clamp – Ring And Key

Hold small parts securely and protect fingers with the leather-lined jaws of this clamp. Rounded at one end, flat on the other.

$12.10 Add to cart

Dusting Brush – Wood Handle

Soft sable brush will not damage even the most fragile finish.

$7.25 Add to cart

Engravers Pegclamp

Holds keys for engraving, sanding, and filing.

$26.00 Add to cart

Fluid Dispenser Pump

Just pump the lid and the fluid of your choice is dispensed into the well of the lid, allowing you to dip a swab for application.

$37.85 Add to cart

Jeweler’s Saw Frame 2-3/4″ Deep Adjustable

2-3/4″ Adjustable Jeweler’s Saw Frame is a wonderful tool. The handle is large, soft, and balanced in the hand. The frame is easily adjustable and the blades mount effortlessly.

$27.75 Add to cart