New Products

Stop messing around with hand brushes, grits and detergents and get to the real work that earns you money. The Powerbrush System raises the bar on speed and simplicity; cleaning is a breeze and results are spectacular. Individual components include a lightweight pneumatic motor, premixed cleaning compound and a wide variety of brushes.

Finally a reliable, reversible solution for temporary and long term headjoint fitting!  Our new copper headjoint strips are used for fitting headjoints to flutes whenever the headjoint is too small to fit securely.  The peel-and-stick adhesive backing makes application simple! Three 1.5" x 4" strips.

JLS Flute Blocks are a fantastic way to hold a flute securely while assembling, padding and adjusting. Flute blocks leave your hands free and keep the flute off the bench, reducing inadvertent scratches and keeping the instrument clean.

Flute Blocks Instructions Here:

Giacomini piccolo. Composite body, silver-plated nickel silver key work.  Great for the advancing student!

Every clarinetist will want this lavishly illustrated and beautifully printed book! A wonderful gift item and resource for the clarinet enthusiast, musician, teacher, and technician. Written in Spanish, the audience for this book extends way beyond the Spanish speaking population alone, as the images and illustrations tell much of the story.

Pad cup collars are used as a fulcrum when lifting the open hole flute key French Bushings (grommets). The collars rest on the metal cup and protect the delicate pad from compression and abrasion, and protects edge of delicate pad cups. 17mm, 17.5mm, 18mm, and 18.5mm.

This simple-to-use tool will quickly help you locate all types of leaks in every model flute. The tool will isolate the flute at different points along its length, and it will also isolate each pad individually.
Used with our #236044 "MAG" machines.

Lifting dents out of flutes has never been easier! Each end has a particular radius and entry angle that will provide the power needed to lift even heavy wall nickel silver tube dents.Hold the tool in the Flute Station (with additional 5/8" sleeve), or hold securely in a vice.

A sturdy bell flare roller is perhaps the most used tool in the brass repair department and certainly essential in removing bell dents and creases. With a roller, removing dents and blending is easier than burnishing, and will not mark the metal. Recently redesigned with a well rounded "safety" cap on the business end.

Removable plastic screw-top vials are an excellent way to organize small parts such as pivot screws, rods, and springs, anything small. Heavy base, 13 vials.

Threadlocker IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Excellent for securing nyloc style pivot screws and also adjusting screws.

We fitted this with our custom aluminum nozzle, so the Mini-Heat Gun focuses hot air in an area small enough to heat a clarinet pad cup. Has a 6' cord, nozzle opening is a 10mm-ID with a 12mm--OD, and 1 speed/temp setting of 300°C.

3 Part NCR numbered tag includes card stock claim check with all the fields you need to track and tally services on band, orchestral, and fretted instruments. 4 1/4" x 9", 250 tags per package.

3 part repair tag imprinted with your supplied company information. 5 lines available. Sold in quantities of 500.
The back of the permanent card record contains more fields for parts and service if needed, and a box for technician's comments.

14mm (.5116") diameter Hard Rubber Rod (sold per foot)

This is the soft non-slip grip we use on our spring hooks. It's also great for smaller plier handles and many other things. Put it in hot water and it becomes soft and stretchable.

Orange-Red LED Leak Light Kit (9" x 3/8" OD) No bulb to break – built with super bright LEDs. No high voltage inverters. Rugged design built to last, and virtually unbreakable. The Red/Orange color contrasts with pads and room lighting. 1-year warranty

Orange-Red LED Leak Light Kit (7" x 1/4" OD) No bulb to break – built with super bright LEDs. No high voltage inverters. Rugged design built to last, and virtually unbreakable. The Red/Orange color contrasts with pads and room lighting. 1 year warranty.

White LED Leak Light Kit (7" x 1/4" OD) No bulb to break – built with super bright LEDs. No high voltage inverters. Rugged design built to last, and virtually unbreakable. 1-year warranty.

White LED Leak Light Kit (18" x 1/2" OD) No bulb to break – built with super bright LEDs. No high voltage inverters. Rugged design built to last, and virtually unbreakable. Color contrasts with pads and room lighting. 1 year warranty.

Deluxe wooden flute headjoint case securely houses four headjoints.  Covered with simulated leather, sporting antique finish brass plated hardware.

Subtle differences in the position of keyholes have a great effect on intonation, responsiveness and overall performance of an instrument. The Flute Scale Story Stick is a simple two-piece tool that allows technicians to accurately locate, measure and analyze the exact positioning of tone holes along the entire length of the flute body.

Flute Story Stick Instructions Here

One of the key factors in determining the tonal quality, responsiveness and overall performance of flute headjoints is the interior taper. The JLS Headjoint Story Stick is a great tool for analyzing interior dimensions and the best way to measure and compare bore shapes.


Flute Headjoint Story Stick Instructions Here:

This remarkable tool set is designed to offer great stability and precise control that will allow you to easily achieve optimal results when flattening and facing saxophone tone holes. Our unique design includes knurled brass bearing collars that allow you to hold the tool with your fingers and to apply evenly controlled downward pressure while keeping the disc flat against the tone hole.

From Wiseman cases in the U.K. comes this unique small format well built and extremely versatile case which offers excellent protection for your valuable instrument.

Removes unwanted paint, graffiti, lipstick, grease, ink and crayons from surfaces.  Safe for use on metals, glass, fiberglass, brick, concrete, marble, porcelain, formica and baked enamel paints.  Spray on surface, wipe or rinse off.  MSDS available on request.
 
Ships only to US or Canada addresses via UPS ground/standard.

Easily remove small to medium sized dents in the body tube of all saxophones. A fantastic way to remove localized dents in the saxophone body. The "crook" shape works it's way around the octave vent tube (without removing it) when you move the stack over the tool. Using a "raking" motion, remove all small dents.

The opposite end of the tool is threaded 3/8-16 with an inserted stainless stud in order to use dent balls of your choice to lift larger dents and to blend and reround.

Our Saxophone Bow Bar is a fantastic way to remove dents from the bottom bow of all saxophones.  The bar is bent to access the bow through the bell on one end and through the Eb hole on the other end.

Our alto sax neck bar is designed to round up dents and flat spots in alto sax necks. Each polished end of the tool can be used; one for coming through the receiver end, and one for coming through the mouthpiece end.

Frustrated with saxophone neck dent work? Add our tenor sax neck bar to your toolbox! The neck bar is designed to round up dents and flat spots in the neck. Each polished end of the tool can be used; one for coming through the receiver end, one one for coming through the mouthpiece end.

Our Valentino Instrument Stand line features two sizes of bases, and pegs to fit piccolos, flutes (including alto and bass), and clarinets, with interchangeable pegs that can be arranged according to your needs. This smaller 5" x 5" base holds a single instrument (center hole) or any combination of two (outer two holes). The stand is sturdy and secure with a solid metal base that helps prevent accidental tipping and machined Delrin™ pegs and a felted bottom surface that won’t scratch your instrument or table.

Our Valentino Instrument Stand line features two sizes of bases, and pegs to fit piccolos, flutes (including alto and bass), and clarinets, with interchangeable pegs that can be arranged according to your needs. This combination flute and piccolo peg has a base for flute, and an included piccolo attachment that holds the piccolo at the same height as your flute.

Hagerty Silver Dip - Gallon. Not Concentrated:  Dip silver into solution and allow to remain for a few seconds.  If necessary, product may also be applied with a sponge or cloth.  Rinse immediately.  To restore the silver's bluish-hue, wash with Hagerty Silver foam.  DO NOT USE ON STAINLESS STEEL.

Our Valentino Instrument Stand line features two sizes of bases, and pegs to fit piccolos, flutes (including alto and bass), and clarinets, with interchangeable pegs that can be arranged according to your needs. This alto flute peg is 10.5" tall.

Our Valentino Instrument Stand line features two sizes of bases, and pegs to fit piccolos, flutes (including alto and bass), and clarinets, with interchangeable pegs that can be arranged according to your needs. This bass flute peg is 12" tall.

Various thicknesses: 1/64", 1/32", 3/32" are 2" x 3"; 1/16" and 3/64" are 4" x 3". 1 Each.

4" x 4" samples of our lint-free synthetic felt in 5 thicknesses: .5mm, .8mm, 1mm, 1.5mm, 2mm. 1 each.

Used as attachments for the Mag Machine, these 2 Testing Cups are for checking the sealing properties of a pad before it is mounted on an instrument. This can save valuable time since you will catch  flawed pads before you spend the time installing and leveling them on an instrument.

Used as attachments on The "Mag Machine," these 5 Testing Cups are for checking the sealing properties of a pad before it is mounted on an instrument. This can save valuable time since you will catch any flawed pads before you spend the time installing and leveling them on an instrument.

The idea for this part came from Master technician John Blythe. This part replaces the E-clip that is used on the valve stem under the felt. The E-clips tend to fail after a time. Our standoff will not.

Quiet those noisy and sloppy feeling left hand fourth finger levers. A very simple yet long lasting solution for this trouble spot on Buffet style pin-and-hole style lever to key actions. The perfect size for taking up the noisy slack in this trouble spot.

9"/22cm rotary cutter is great for cutting sheet goods with a clean straight edge. Comes with replacement blade.

Protect your instrument with style! Our Valentino hardwood flute case will fit all modern B-foot instruments. It's designed to elegantly and securely protect your instrument, and looks beautiful too. Routed from solid hardwoods, lined with ultrasuede.

Made of Maple, with simulated leather covering. Antique finish brass plated latches.

This beautifully finished solid maple case is specifically designed with proper internal dimensions to protect delicate wooden headjoints. Like all of our Valentino cases, this one is well-crafted and built to last, with durable synthetic leather and sturdy, antiqued brass-plated hardware.

Our Valentino Instrument Stand line features two sizes of bases, and pegs to fit piccolos, flutes (including alto and bass), and clarinets, with interchangeable pegs that can be arranged according to your needs. This clarinet peg is 4.5" tall, and machined to fit the curvature of the clarinet bell.

Attaches easily to the Professional Heat Gun - item 201079.