ISOLATORS & FEELERS

Our lightweight plastic feeler holder provides for quick and easy insertion of feeler strip material with just the right tension.

CURRENTLY BEING REDESIGNED

Neck leaks are often overlooked by many technicians and can be the source of performance problems on an otherwise perfect horn. This area warrants careful inspection. These tools use an expanding washer to plug the body below the neck tenon. Check suction with neck installed. The neck fits over the tool.

CURRENTLY BEING REDESIGNED

Neck leaks are often overlooked by many technicians and can be the source of performance problems on an otherwise perfect horn. This area warrants careful inspection. These tools use an expanding washer to plug the body below the neck tenon. Check suction with neck installed. The neck fits over the tool.

.0005" x 4'' x 4''

.001" x 4'' x 4''

.002" x 4'' x 4''

.003" x 4'' x 4''

.004" x 4'' x 4''

.0075" x 4'' x 4''

Replacement rubber washer for the Alto Neck Leak Isolator.

Replacement rubber washer for Tenor Neck Leak Isolator.

This simple-to-use tool will quickly help you locate all types of leaks in every model flute. The tool will isolate the flute at different points along its length, and it will also isolate each pad individually.
Used with our #236044 "MAG" machines.

Sharp/soldered tone holes edges can damage the O rings. If an O ring gets damaged, replace it promptly. The smaller O ring is an option when the flute bore is a little small and too tight. Lubricate O rings by applying a small amount of Magic Dust (item 113029). These are sold individually and the Schmidt leak isolator (item 236042) is a separate purchase.tem 113029).  These are sold individually and the Schmidt leak isolator (item 236042) is a separate purchase.