GENERAL BENCH TOOLS

Bench blocks are used as anvils for spring peening and as a base for sax pad installing. Use as a standard for rod and cup straightening etc..

Provides a 3/4" (83mm) extension of the work bench. Consists of rubber block, iron frame and chilled steel anvil. Used mainely for a softer surface when filing on a key, brace or something else that needs support.

Bench blocks are used as anvils for spring peening and as a base for sax pad installing. Use as a standard for rod and cup straightening etc.

Measures 3-1/2 X 4" square. Great for dapping patches. Use for removing pins from posts. Use to hold parts for operations by tapping the part into the lead.

Finest single edge blades of surgical carbon steel. 100/box.

Ultra smooth cut. There is no drag when making your cut. Eric Satterlee calls these our "designer" razor blades. 100/box.

Soft sable brush will not damage even the most fragile finish.

Holds keys for engraving, sanding and filing.

Hold small parts securely and protect fingers with the leather lined jaws of this clamp. Rounded at one end, flat on the other.

High quality tweezer. Great for managing flute shims, instrument felts and corks.

Great all around bench saw.

Ideal for mixing epoxy etc. Has many uses around the shop.

Used to mark cut-off lines and so forth. Tip can be reversed for safe carrying.

Just pump the lid and the fluid iof your choice is dispensed into the well of the lid, allowing you to dip a swab for application.

Use of magnification will improve your work! BUY ONE NOW!!!

This accessory works with the OptiVisor (no longer carried by JLS) to bring an even higher level of magnification for jewelry type close up work.

Flame can be adjusted by raising or lowering split sleeve. Measures 2.58" (65.5mm) in diameter and holds 3 oz. of fuel.

Tweezers, Slide Lock, 6"

Adjustable butane torch found in the Flute and Clarinet "Fix Kits".  Excellent for use as a "road torch" or as a back up to a professional torch as well.

Hold taps securely and with ease!

This is an affordable cutting mat that's included in our Fix Kits

Use to punch out holes in sax pads or round discs of material for silencers.

Drill a 3/8" hole in the face of your workbench to mount the bench peg. We do not recommend the Delrin bench peg for lathe work.

Drill a 3/8" hole in the face of your workbench to mount the bench peg. Mounted in lathe chuck, it will hold thick wall joints for turning.

This adjustable, lockable flame, electronic ignition butane torch is perfect for soldering instruments as well as a myriad of other uses in the workshop.  

We fitted this with our custom aluminum nozzle, so the Mini-Heat Gun focuses hot air in an area small enough to heat a clarinet pad cup. Has a 6' cord, nozzle opening is a 10mm-ID with a 12mm--OD, and 1 speed/temp setting of 300°C.

9"/22cm rotary cutter is great for cutting sheet goods with a clean straight edge. Comes with replacement blade.

Attaches easily to the Professional Heat Gun - item 201079.

Compact, lightweight and easy to use, this heatgun is a variable temperature heat gun perfect for just about any job where heat is needed. Features solid state construction variable temperature control dial (250°F - 1100°F), 2 speed motor and is UL and CSA listed.

Used with our Power Brush System, this high-speed, hand held air die grinder has a free speed of 25,000 rpm.