DENT TOOLS

Remove dents without changing the original tubing size. Even pressure moves the metal. The ball end of the tool is coated Teflon coated. The tool comes in two sizes for trombone, three sizes for trumpet.

Remove dents without changing the original tubing size. Even pressure moves the metal. The ball end of the tool is coated Teflon coated. The tool comes in two sizes for trombone, three sizes for trumpet.

Remove dents without changing the original tubing size. Even pressure moves the metal. The ball end of the tool is coated Teflon coated. The tool comes in two sizes for trombone, three sizes for trumpet.

Remove dents without changing the original tubing size. Even pressure moves the metal. The ball end of the tool is coated Teflon coated. The tool comes in two sizes for trombone, three sizes for trumpet.

Remove dents without changing the original tubing size. Even pressure moves the metal. The ball end of the tool is coated Teflon coated. The tool comes in two sizes for trombone, three sizes for trumpet.

As with all our mandrels, these are made with appropriate geometry to a fine degree of precision, and carefully finished. The entry features a perfect radius for "raking" small dents. 24" total length, tapering from 1" to 1/2".

As with all our mandrels, these are made with appropriate geometry to a fine degree of precision, and carefully finished. The entry features a perfect radius for "raking" small dents. Ready to use! Requires no expensive finish work on your part to prepare. 32" Long. Tapering from 1-1/4" to 5/8".

Our Knuckle Bars have radiused and polished ends which will effortlessly push up knuckle and crook small dents and dings.  Designed to be held in a vice to provide power and control.  The set of 5 will reach most dents in these hard to reach areas.

Along with our 263001 10-24 thread dent balls, this tool set will lift even the sharpest dents from knuckles and crooks.  They may be used freehand, or held in a vice to provide more power.  The set of 6 will reach most dents in these hard to reach areas.

While balls are great for powerful lifting on deep dents, barrel shapes are better for wide area lifting,  rounding, and blending.  Use with our 206018 rod set.  Barrels are available separately as well.

Originally made as a special order for a client, we've decided to make this available to the trade.
Works great for medium size dent balls including old Eric Brand 1/4-20 balls.
5/16"-18 on one end,
1/4"-20 on the other end

Can be used to reround clarinet rings and other things.

Contains: 19mm-3/4", 22.2mm-7/8", 25.4mm-1" 1-1/8".
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

7/16"

Also fits: Ferree's N55 knuckle tools, N73 gooseneck rod, N124 French horn dent rods.

1/2"

Also fits: Ferree's N55 knuckle tools, N73 gooseneck rod, N124 French horn dent rods.

9/16"

Also fits: Ferree's N55 knuckle tools, N73 gooseneck rod, N124 French horn dent rods.

5/8"

Also fits: Ferree's N55 knuckle tools, N73 gooseneck rod, N124 French horn dent rods.

3/4"
19mm-3/4 Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

7/8"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

1"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

1-1/8"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

Contains: 7.9mm-5/16", 9.5mm-3/8", 11.1mm-7/16" and 1/2" dent balls.

Also use on Ferree's N54 knuckle tools, N68 right angle mandrel, N91B tapered mandrel.  

5/16"

Also use on Ferree's N54 knuckle tools, N68 right angle mandrel, N91B tapered mandrel.  

3/8"

Also use on Ferree's N54 knuckle tools, N68 right angle mandrel, N91B tapered mandrel.  

7/16"

Also use on Ferree's N54 knuckle tools, N68 right angle mandrel, N91B tapered mandrel.  

1/2"

Also use on Ferree's N54 knuckle tools, N68 right angle mandrel, N91B tapered mandrel.  

1-1/8"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

1-1/4"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

1-3/8"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.

1-1/2"
Also fits: Ferree's  N31, N32, N33, N70, N71, N74 dent rods and N72 bow dent remover.